News Morning 24.1

(Tall) Bike Check

Want to know what it took to build our tall bike? Here’s the parts list.

GRIPS: Griswald
HANDLEBAR: Four:four Bar
STEM: Elementary
HEADSET: Odyssey Short Stack, x4
FORK: Sunday 24.1 (custom steerer tube length)
FRAME (TOP): Sunday Model D
FRAME (MIDDLE): Sunday Model D
FRAME (BOTTOM): Sunday Model C
TIRE (FRONT): Aitken, 24×2.25″
RIM (FRONT): Hazard Lite, 24″
HUB (FRONT): G-Sport Marmoset
TIRE (TOP): Frequency G, 1.75″
RIM (TOP): G-Sport Rollcage
HUB (TOP): G-Sport Ratchet
TIRE (BOTTOM): Path, 24×2.1″
RIM (BOTTOM): Hazard Lite, 24″
HUB (BOTTOM): G-Sport Ratchet, 9t
CRANKS: Twombolt, 180mm
CRANKS (OTHER): Old 41 Thermal Cranks, x4
SPROCKET (1): Vermont, 27t
SPROCKET (2): Vermont, 28t
SPROCKET (3): Vermont, 23t
SPROCKET (4): Vermont, 30t
SPROCKET (5): Vermont, 25t
CHAIN: KMC, x3
PEDALS: JCPC
BRAKE LEVER: Mono Lever, Medium
CABLE: Linear Slic Kable
BRAKE: Evo 2 Brake
SEAT POST: GI Post
SEAT: Aaron Ross Tear Away Denim (Veteran)

You may have seen some photos of this tall bike floating around the internet these past few days and we decided to put together a little bike check featuring all of the parts we ended up using to make it happen. The hardest part to make this bike a reality was having a solid steering mechanism (we ended up having to use 4 headsets) and getting the right sprocket size combos to get the chain tension right through out the whole drive-terrain. The end result is a ridiculously tall bike with a lot of parts and a top wheel that rolls backwards when the bike is rolling forwards.

A huge thanks goes out to Rob at CM Speed for doing the welding for us!