New limited edition Fluorescent Yellow stock wheels available now. Throw ’em on and start ripping. Flo Yellow Hazard Lite rims also available.
Oct 14, 2019 • News, Product, Team
Fluorescent Yellow Hazard Lite Rims & Wheels
Oct 7, 2019 • News
The day before his most recent trip to California, Scotland’s Jensen Murray got word that he would be riding for Sunday and Odyssey through Backstreet Distribution in the UK – how’s that for a way to start your vacation! He didn’t even need to pack a bike – straight off the plane to Full Factory for a fresh whip! Looks like the hype was high for Jensen as he filming some solid clips. Sit back and enjoy his welcome video.
Filmed and edited by Innes Graha.DigBMX.com
Oct 4, 2019 • Team, Videos
Welcome back to the 10 SPOT! Next up, we’re proudly joined by the LEGEND Mike Aitken. Hit play to see if your question was chosen. Enjoy!
10 SPOT Q&A videos feature 10 questions for one of our team riders. Follow @odysseybmx on Instagram for the next episode and be sure to get your questions in. We chose the best ones.
Sep 16, 2019 • News, Team, Videos
Best Trick at Vans Pro Cup
Sep 9, 2019 • News, Team
NORA Reader’s Choice Cup!
Sep 2, 2019 • News, Team, Videos
Don’t let the title fool you – the video is not chill. Travis may be just about the chillest dude there is, but put him on a bike and he becomes a determined, fearless, and practically unstoppable maniac who’s sole focus is pushing his riding to the next level. Filming for more than three years, Travis got to be as picky as he wanted with this one, and the time and work he put in shows. Press play and watch this guy CRUSH it!
Aug 30, 2019 • News, Product
Limited Edition Cyan
Aug 28, 2019 • News Odyssey in the UK via Back Street Distribution
Aug 27, 2019 • Bike Checks, News, Team, Videos
Adam built up a new bike that’s as unique as his riding. The top-tube’s new but everything else is still Odyssey. Hit play for the full parts list and some choice clips.
Aug 26, 2019 • News, Product, Videos 2019 Stampy Fork Test
20 Years of 41-Thermal
As part of our mission to make the best BMX forks possible, we continue to refine the 41-Thermal® process at all stages of manufacturing. Each step in the process is held under strict scrutiny, and we continue to examine the strength and fatigue testing methods used to evaluate our designs.
Stampy Test Goes Above and Beyond the Industry Standard
- Much higher load than industry standard EN tests
- Load is applied in the correct direction
- Proper mounting rig to replicate real world use
- Test doesn’t stop until the fork fails
In the previous round of Stampy fork tests we blew the industry standard EN tests for bicycle forks out of the water, and yet we still couldn’t break our own fork. In fact, we had to give up after running the fork for 2,000,000 cycles and with the machine operating at its ultimate limit.
So, in order to push the tests and our forks even harder we created an updated rig design that would let us supply much more force than the last time around. With this test we doubled up the cylinders that are applying the load and ramped the force up by 25%, going from 4000 Newtons to 5000 Newtons. That’s just over half a ton! (1124 lbf per cycle). Even so, at half a million cycles we started to wonder how long our forks were going to last, and since our competitor’s forks had already been taken to failure, we decided to ramp up the load on our forks to 6000 Newtons (1349 lbf), 50% higher than the previous tests, and after over 650,000 cycles, we were finally able to break them.
It is important to note that the 41-Thermal forks not only outperformed every other model that we tested by a huge margin, but that they did so while being lighter than most of the other forks too. This is direct evidence that proper design, engineering and manufacturing are much more important factors than simply always making the part heavier in hopes of making it stronger.
Unmatched and Legendary Lifetime Warranty
- Best in class replacement program
- Warranty against bending, cracking, and breaking
- No fine print to limit coverage to basic manufacturing defects
When you see how hard we push to make the best forks; to make them better and better every chance we get, it is easy to understand why our legendary lifetime warranty against bending and breaking is still around 20 years after we first introduced it. And when you see the contrast between our forks and our competitors you can also quickly see why most of their warranties have long since been quietly canceled or modified with complicated terms and conditions that usually limit the warranty to manufacturing defects alone.
Feel free to contact us at email@example.com with any questions you may have.