Our current Pomegranate kit is featured in the product section of the current Ride BMX, so this is a good time as any to remind you that it is available now.
USA dealers please contact QBP, SBS, Custom Cycle, J&B or Full Factory Distribution.
International dealers please hit up our distro page.
Our new Principal saddles are in and available now (black only. White & Grey soon). Pivotal only.
The Principal saddle comes in 2 versions; a Gary Young and an Aaron Ross model. We worked with both of them to come up with one custom foam shape, and wrapped them with specific materials of their design.
Click below for a break down of each.
Our brand new aluminum Rifle Pegs are available now. Click below for more photos and information.
We have 2 brand new Odyssey Round & Round shirts available right now (seen above).
These are only available on our online store, and there are not very many of each.
Go HERE for the Black version.
Go HERE for the Heather Red version.
ACT FAST!!
Here’s Taj onstage at Nora Cup as he announced #1 Street rider. Hit up his Fairdale Blog to read his take on things.
That’s our new “WRENCHES” shirt he’s rocking too. Available HERE.
Here is some of the new stuff you will be psyched on. More detailed videos soon. Take that.
Here is the first detailed look at Chase Hawk’s upcoming signature stem, the Tomahawk.
53mm reach
6061-T6 custom forged aluminum
Internal clamping system
9.5mm rise or 22.5mm flipped
8.9 ounces
Black, Raw, Limited
Our goal with the Tomahawk was to develop a new front load stem that used a modified version of the steerer tube clamping system found in the Elementary Stem. This approach would eliminate sharp bolts and edges at the back, keep the weight down, and still allow riders to tighten and loosen the bars and steerer tube independently from one another. The Tomahawk wedge system is captured in the body, allowing riders to remove it only when maintenance is necessary. The steerer tube is clamped by tightening one 6mm hex key bolt on the side of the stem.
We also set out specifically to design the stem around its own unique forging blanks for both the cap and body. Forging maximizes the strength of the material, and helps keep the manufacturing costs down. Machining the same shape from a block of aluminum would be weaker, it would be wasteful of material, and the retail price would be unreasonable. The unique nature of the stem’s tomahawk-inspired front load body shape allows it to look “normal” whether it is installed traditionally or upside-down to raise the bars.
The end result is a strong, lightweight, front load stem with a series of unique features and the aesthetics that Chase asked us for.
Terry Adams Signature Cufflink grip is available now!
For fans of shorter grips, the Thumb Tack is also available.
Click below for more Cufflink grip pics.
Here’s a Gary Young pic from Dennis Enarson’s Aitken benefit jam this weekend, courtesy of Josh Hayes. Sweeeeeet.
