News par ends

Mario Carrasco (Give D!)

FRAME: Subrosa Pandora, 20.5″
FORKS: Odyssey Race
BARS: Odyssey Lumberjacks
STEM: Fly
HEADSET: Impact
GRIPS: Odyssey Gary Grips
BAR ENDS: Odyssey Par Ends
SEAT: Odyssey Veteran
SEAT POST: A beefy one?
CLAMP: integrated
CRANKS: Odyssey Twombolts, 175mm
SPROCKET: Odyssey Vermont, 28t
CHAIN: KMC 410, Heavy
PEDALS: Odyssey Trail Mix
RIMS: Odyssey Hazard Lite
FRONT HUB: Odyssey Vandero
REAR HUB: Odyssey Hazard Cassette V3
FRONT TIRE: Fit Foldable
REAR TIRE: Revenge Fatty
STOPPIES: Odyssey Monolever, Linear Slic Kable and Evo II
GRINDERS: “Old Hoffman Pegs? I don’t know. Yes.”
MODS: “Bars cut, Odyssey stickers equipped, Torn ACL engaged!”

“Mario shreds New Mexico terrain all day, all long. He just recently dialed in his new Brosnasnu Pandora with a bunch of fresh ODSY goodies so he decided to shred and get some photos with his new set up. What he didn’t plan on doing after dialing in a new bike was un-dialing his knee… Mario recently got broke off on a toothhanger gone wrong with a case of regretful footdown… Mario’s part of the knee club now and he’s now awaiting more doctor visits and surgery. I don’t know the full extent of his messed up knee but he should be back up and healthy in about 6 weeks… Get well brotherrrrrrr!” – Alex Bermudez

Front and rear stoppies

FRAME: Eastern Harvester, 20.75″
FORK: Odyssey Freestyle
BARS: Odyssey Aaron Ross SpaceBar
STEM: Odyssey Elementary V3
HEADSET: Eastern
GRIPS: Odyssey Aaron Ross
BARENDS: Odyssey Par Ends
DETANGLER: Odyssey Gyro, GTX-R
HEADSET: Eastern
CLAMP: Integrated
SEATPOST: Pivotal
SEATS: Odyssey Senior 2, Pivotal
CRANKS: Odyssey Twombolts, 175mm
SPROCKETS: Odyssey MDS, 30t
CHAIN: Eastern
BRAKES: Odyssey Evolver 2
CABLEs: Odyssey M2 upper, G3 Lower AND Slic Kable (front)
BRAKE LEVERS: M2, Med (right) AND Monolever, Med (left)
FRONT TIRE: Aitken, Klyte, 2.25″
REAR TIRE: Frequency G, 1.85″
FRONT HUB: GSport Marmoset, 36h
REAR HUB: GSport Ratchet, 36h
RIMS: Hazard Lites
SPOKES: Odyssey Aftermarket, Stainless
HUB GUARD: GSport G.L.A.N.D.
PEGS: Pleg prototypes
PEDALS: Twisted PC
PHOTOS BY JEFF HALL

Photo Caption #3

Photo Description #3

The last guessing game was a bit of a curve ball with most people guessing Aaron Ross or Terry Adams. If you were to look into a crystal orb (in this case, our Twitter account would be an adequate substitute), you’ll discover they actually belong to Mr. Adam Banton. We sent him a really bright parts kit and he’s done well with them. The black makes the colors pop like crazy and his new bike is looking dope. Check it out above (photos by Jeff Hall).

If you’re interested in stalking Adam, follow him on the Twitter and le Flickr.
The read more teleporter will take you to Adam’s 2003 Odyssey video part.
His Electronical part is on the way.

View More

Bike Check:
Terry Adams

FRAME: Flatware, Prototype
FORK: Flatware, Prototype
BARS: Flatware Terry Adams, Bayou Bars, Prototype
STEM: Flatware, 28mm, prototype
HEADSET: Odyssey, prototype
CRANKS: Flatware Twombolt, 160mm, Prototype
SPROCKET: Flatware, 22t, Prototype
RIMS: GSport Ribcages, powdercoated
FRONT HUB: GSport Marmoset
REAR HUB: Ares Freecoaster
SEATPOST: Odyssey Intac
SEAT: Odyssey Veteran
SEAT CLAMP: Mr Clampy
PEDALS: Exercise Bike
PEGS: Flatware Plegs, Prototype
CHAIN: Generic
BRAKE: Odyssey Evo2
BRAKE PADS: Slim by 4, Red, Medium
LEVER: Odyssey Monolever, Medium
CABLE: Odyssey Slic Cable
TIRES: Frequency G, Foldable, Tanwall
BARENDS: Odyssey Par ends
PHOTOS BY ROBBY KLEIN

There are a lot of Flatware products currently in the prototype stages and Terry Adam’s ride has just about all of them. Check out his bike check above to get a full list and a closer look. Also, if that shirt looks familiar, it’s the Frequency G tire pattern shirt we posted about a while ago.

All photos are by Robby Klein.

AB/ODSY’s Bike in Black

Adam Banton
Photo by Kieth Mulligan (Ride BMX)

Adam Banton has a new bike check over at the Ride website. The photos are embedded after the jump but you can read about the full details of his setup over at RideBMX.com.

View More

Aaron Ross (Race) Bike Check

FRAME: FBM SS 21.25″
FORK: Director
BARS: Lumberjacks
STEM: Elementary V3
HEADSET: Generic
SADDLE: Aitken
SEATPOST: Intac
CLAMP: Mr. Clampy Too
FRONT RIM: Hazard Lite
FRONT HUB: Vandero 2, 36h
FRONT TIRE: Dirt Path, K-Lyte, 2.20″
REAR RIM: Hazard Lite
REAR HUB: Cassette 3, 36h, 9t
REAR TIRE: Aitken, K-Lyte, 1.90
SPOKES: Straight Gauge
SPROCKET: Animal, 29t
CRANKS: Twombolts, 175mm
PEDALS: Trailmix, Clipless
GRIPS: Aaron Ross Signature
BARENDS: Par Ends
SPECIAL MODS: The rear hub is tapped out with G-Sport bolts. Thanks Tom and Levi!

RACE BIKE?! Yep, you read that right. When not doing ridiculous street lines, Aaron likes to occasionally hit up the dirt track and pedal as fast as humanly possible. This is his race bike.

Photos by Devon Hutchins.

Chase Hawk Bike Check

FRAME: The Hawk, 20.5″
FORK: Fit
BARS: Fit
STEM: Fit
HEADSET: Integrated
SADDLE: Fit
SEATPOST: Fit
CLAMP: Integrated
FRONT RIM: Odyssey Hazard Lite, Gold, Sample
FRONT HUB: Odyssey Vandero 2
FRONT TIRE: Odyssey Aitken, Plyte, 2.125″, Knobby
REAR RIM: Odyssey Hazard Lite, Gold, Sample
REAR HUB: Odyssey V3 Cassette, LHD 9t, 36
REAR TIRE: Odyssey Path, Plyte, 2.1″
SPOKES: G-Spoke Straight Gauge
SPROCKET: Odyssey Vermont, 28t
CRANKS: Odyssey Wombolts, LHD, 175
CHAIN: KMC
PEDALS: Odyssey Trailmix, Mag, Sealed
GRIPS: Odyssey Aaron Ross
BARENDS: Odyssey Par Ends

Chase Hawk is rolling on gold these days. Click through the flip-book above to check out his current ride.

TAJ CHECK

Taj has a bikecheck up on the DIG BMX site.

Par Ends ad

Download

DOWNLOAD »

Here’s the Par End ad that we recently ran in the magazines. Don’t get the Par Ends confused with the cheap ones you get free with grips. These are way more durable, and inexpensive. Hit up your local shop.

JIM CIELENCKI BIKE CHECK

Jim Cielencki has been in town visiting, drinking Starbucks and terrorizing the town in his Dodge Caliber.

Below you can find a bike check with his current rig.

On a related note, Jim’s BELOE shoe will be out soon.

View More

Jim Bauer Bike Check

Jim Bauer

frame– Metal Rebel Contender, 21′, Raw
fork– Director Fork, Shiny Red (sample)
bars– Lumberjack, Shiny Red (sample)
stem– Elementary V3
headset– FSA sealed
saddle– Senior 2
seatpost– 25.4 Intac
clamp– integrated
rims– Hazard Lite 36h. Shiny Red (sample)
hubs– Vandero 2 (f). GSport Ratchet/9T (prototype)(r)
sprocket– 28T Vermont
cranks– Odyssey Wombolt cranks(175) (prototype), Purple
chain– 510
pedals– JC/PC (prototype)
tires– Odyssey Aitken 2.25 Klyte(F) 2.2 Dirt Path Klyte(R)
pegs-GSport Plegs (3)
grips-Aaron Ross(flanges removed)
barends-Par ends

vvv More Pics vvv

View More