News Frequency G

Fat Tony just put a video bike check with our boy Terry. There are solid clips in here so make sure to hit play!

View More

We shot this video a couple weeks after our Texas Toast Jam. JF hopped in the van with us on the way back to California and ended up spending quite a bit of time out here. If you’re ever driving down PCH near Zuma beach, keep your eyes peeled on the parking lots by the coast. You might just catch a heavy flatland sesh going down.

JF’s home in Montreal now and nursing some cracked ribs. Once he heals up though, it’s a guaranteed bet he’ll be hitting the road again. In the mean time, here’s his bike check along with a couple clips. Enjoy :)

View More

Want to know what Terry rides and why? Check out this new video bike check from Dan’s Comp to find out.

View More

X

FRAME: Flatware Waltz
FORK: Flatware Steep Offset
BARS: Flatware Hobby Bar
STEM: Flatware
HEADSET: Odyssey Sealed
LEVER: Odyssey Monolever, Medium
CABLE: Odyssey Linear Slic Kable
BRAKE: Odyssey Evo 2
BRAKE PADS: Odyssey Slim x 4
GRIPS: Flatware Thumbtacks
TIRES: Odyssey Frequency G, K-Lyte, 1.85″
RIMS: G-Sport Birdcage, 36-H
HUB (F): Flatware Vandero 2
HUB (R): KHE, 9t
SPROCKET: Flatware Rhode Island, 22t
CRANKS: Odyssey Thunderbolt, Socket Drive, 160mm
PEDALS: Wellgo
SEAT: Odyssey Senior 2, Kevlar
SEAT POST: Odyssey Intac
SEAT CLAMP: Odyssey Mr. Clampy Too
PEGS: Knurled Flatland Pegs

i

X

The Waltz frame

i

X

Hobby Bar (NEW!) - Available Now

i

X

Cufflink grips and Monolever

i

X

Flatware Stem

i

X

Flatware Stem

i

X

Evo 2 brakes

i

X

Flatware Fork (Steep Offset)

i

X

Flatware Vandero 2

i

X

Intac Post and Senior 2 saddle

i

X

Thunderbolt cranks and Rhode Island sprocket (Socket Drive)

i

X

Stamped dropouts on The Waltz

i

X

Frequency G tires

i

X

G-Sport Birdcage rims

i

Here’s Terry Adams’ old bike! Kinda weird to do a bike check on an old bike, but we have been sitting on these photos for a while. This is the Bike Terry rode in Terry and Aaron, The Sequel.  This was the prototype stuff that we didn’t want to show until it was out, complete with an updated look of The Waltz frame and his new signature Hobby Bar. You can’t get this bike in Purple, but like Terry’s New bike (Bike check coming soon) it is all available in Blacker than Black. Click around the flipbook to check it out!

Terry Adams has a bike check over at RideBMX.com. The purple colorway isn’t available yet but most of the other Flatware products on his bike is.

Curious to know what Matthias is riding these days? Head over to RideBMX.com to find out.

X

FRAME: The Waltz, Sample
FORK: Flatware Fork
BARS: Bayou Bar
STEM: Flatware
HEADSET: Short Stack
LEVER: Monolever, Medium
CABLE: Linear Slic Kable
BRAKE: Evo 2
BRAKE PADS: Slim x 4, Clear
GRIPS: Thumb Tack
TIRES: Frequency G, K-Lyte, 1.9″
RIMS: Seven K-A
HUB (F): Flatware Vandero 2, Prototype
HUB (R): G-Sport Ratchet,9t
SPROCKET: Rhode Island, 22t
CRANKS: Twombolt, Socket Drive, 160mm
PEDALS: Twisted PC
SEAT: Veteran
SEAT POST: Convertible
SEAT CLAMP: Mr. Clampy
PEGS: G-Sport Plegs

i

Here’s another bike we have on display in the Full Factory booth at Interbike. It’s called The Waltz and it’s equipped with the Flatware products that’s currently available, along with some samples and prototypes that are in the works.

Ocean Blue Bayou Bars, Flatware Forks and Socket Drive Twombolts will be available later this year (black versions are available now).

Dan’s Comp has a BIG Flatware giveaway going on right now! If you signup, you can win a Flatware kit including Terry Adams signature Bayou Bars, Flatware Stem, Flatware Twombolts w/Rhode Island Sprocket and Frequency G tanwall tires! Click the pic above to enter.

X

The parts list is below and the Q&A’s in our Daily Word!

FRAME: Eastern Reaper, 21″
FORK: Director
HEADSET: Odyssey Short Stack
STEM: Elementary V3
BAR: Aaron Ross Spacebars
GRIP: Adam Banton 2, Prototype
BAR-ENDS: Par Ends
BRAKE: Evo II
LEVER: M2 Lever
BRAKE PADS: Slim by Four, Clear
GYRO: GTX-R
SPROCKET: Million Dollar Sprocket, 28t
CRANKS: Twombolt, 175mm
PEDALS: JCPC
SEAT CLAMP: Integrated
SEAT POST: A fistful of Pivotal
SEAT: Senior 2, Pivotal
HUB (F): Vandero 2
HUB (R): G-Sport Ratchet, aluminum 3/8″ axle
TIRE (F): Aitken, K-Lyte, 2.25″
TIRE (R): Frequency G, K-Lyte, 1.85″
RIMS: Seven K-A
SPOKES: Odyssey HGS

i

Adam Banton shot a bunch of pics of his bike recently and sent it over to us. It’s looking rather devilish with the all black and splash of red scheme he has going on. Click around the flipbook above to see what parts he’s running and hit up the Q&A below to learn a little more about his setup and what he’s been getting into lately.

View More

X

Want to know what it took to build our tall bike? Here’s the parts list.

GRIPS: Griswald
HANDLEBAR: Four:four Bar
STEM: Elementary
HEADSET: Odyssey Short Stack, x4
FORK: Sunday 24.1 (custom steerer tube length)
FRAME (TOP): Sunday Model D
FRAME (MIDDLE): Sunday Model D
FRAME (BOTTOM): Sunday Model C
TIRE (FRONT): Aitken, 24×2.25″
RIM (FRONT): Hazard Lite, 24″
HUB (FRONT): G-Sport Marmoset
TIRE (TOP): Frequency G, 1.75″
RIM (TOP): G-Sport Rollcage
HUB (TOP): G-Sport Ratchet
TIRE (BOTTOM): Path, 24×2.1″
RIM (BOTTOM): Hazard Lite, 24″
HUB (BOTTOM): G-Sport Ratchet, 9t
CRANKS: Twombolt, 180mm
CRANKS (OTHER): Old 41 Thermal Cranks, x4
SPROCKET (1): Vermont, 27t
SPROCKET (2): Vermont, 28t
SPROCKET (3): Vermont, 23t
SPROCKET (4): Vermont, 30t
SPROCKET (5): Vermont, 25t
CHAIN: KMC, x3
PEDALS: JCPC
BRAKE LEVER: Mono Lever, Medium
CABLE: Linear Slic Kable
BRAKE: Evo 2 Brake
SEAT POST: GI Post
SEAT: Aaron Ross Tear Away Denim (Veteran)

i

You may have seen some photos of this tall bike floating around the internet these past few days and we decided to put together a little bike check featuring all of the parts we ended up using to make it happen. The hardest part to make this bike a reality was having a solid steering mechanism (we ended up having to use 4 headsets) and getting the right sprocket size combos to get the chain tension right through out the whole drive-terrain. The end result is a ridiculously tall bike with a lot of parts and a top wheel that rolls backwards when the bike is rolling forwards.

A huge thanks goes out to Rob at CM Speed for doing the welding for us!